Table of Contents
Advertisement
Overview
Core Switch 2/64 Fibre Channel Ports
Fibre channel port specifications include:
Blower Assembly Side of Chassis
Figure 2
provides access to the following components:
See
24
Support full duplex link speeds at 2.125 Gbps or 1.0625 Gbps (inbound and
outbound).
Automatically negotiate to the highest common speed of all devices
connected to the port.
Operate with short wave length (780-850) and long wave length (1270-1350
nm) Small Form Factor Pluggable (SFP) media transceivers, and
SFP-compatible cables.
Provide a SerDes (serializer/de-serializer), which accepts 10-bit wide parallel
data and serializes it into a high-speed serial stream.
Are capable of individually becoming fabric loop ports (FL_Ports ), fabric
ports (F_Ports), or expansion ports (E_Ports).
Use color-coded labels to indicate which ports are used in the same ISL
trunking group.
Conform to the American National Standards Institute (ANSI) Fibre Channel,
FC-PI specification for Fibre Channel SFP transceivers.
identifies components on the blower assembly side of the chassis, which
WWN card and bezel: Provides LED for monitoring switch from the blower
assembly side and persistently stores WWN, IP addresses, switch name, and
serial number.
Blower assemblies: Includes three blower assemblies, individually
hot-swappable.
Table 2
for component descriptions.
Core Switch 2/64 V4.1 Installation Guide
Advertisement
Table of Contents
