HP AA-RS2WC-TE Installation Manual page 181

A 10 ft. (3.0m) serial cable is provided with the switch; it can be converted from a
DB-9 serial cable to an RJ-45-style serial cable by removing the adapter on the
end of the cable.
The serial port requires a straight through serial cable with a female 9-pin D-SUB
connector.
Table 19: Serial Port Pin Outs
1
2
3
4
5
6
7
8
9
Each CP card contains a modem serial port with a fully RS-232 compliant DB-9
connector.
Note:
discharge (ESD) particles from entering the modem serial port. When the modem
serial port is not in use, make sure to replace the port cover.
Core Switch 2/64 V4.1 Installation Guide
9600 baud
8 data bits, no parity
1 stop bit
no flow control
Table 19 lists serial port pin outs.
PIN Signal
TxData
RxData
GND
A port cover is included with the switch to prevent dust and electrostatic
Description
Transmit Data
Receive Data
Logic Ground
Technical Specifications
181