Replacing SFPs
Use these steps to replace SFPs.
Note:
Chapter
1. Remove the appropriate cable from the SFP.
2. Disconnect the faulty SFP module from the port.
3. To install a new SFP transceiver:
Core Switch 2/64 V4.1 Installation Guide
Purchase SFPs separately. For purchasing information, refer to
1.
a. Position the SFP so that the key is oriented correctly to the port.
b. Insert the SFP into the port until it is firmly seated and the latching
mechanism clicks.
Installing Core Switch 2/64 FRUs
Table 4
in
157