Table of Contents
Advertisement
Installing and Configuring the Core Switch 2/64
Table 5: Core Switch 2/64 Carton Contents Checklist
Item
Core Switch 2/64 populated with two 16-port cards, two CP cards, four power
1
supplies and three blower assemblies.
StorageWorks Fibre Channel Core Switch 2/64 Installation Guide, Release Notes
2
software CD, and license
One Accessory Kit containing one ESD grounding strap, sixteen cable guides, and two
3
power cord retainers, with Phillips screws (#4-40), and #1 Phillips screwdriver as a
required tool
RS-232 serial cable with an RJ-45 adapter
4
AC power cords (2) Currently two set of power cords that are shipped with the Core
5
Switch 2/64 switch. One set is for pmHP & the other set is for pmCPQ.
For the pmHP Core Switch, two jumper cables (C19 – C20) are provided to connect
from the switch to the PDU. The PDU that we recommend is E7671A. Two E7671A are
recommended for power redundancy. The recommended power cords to connect from
the PDU to the wall are E7803A, E7805A, E7806A, E7808A, E7809A. Both are
standard US receptacles. These cables are then plugged into a PDU (Power Distribution
Unit) in the rack, which is customized by country.
14U Rack Mount Kit containing: Left rack mount shelf bracket, (1); Right rack mount
6
shelf bracket, (1)
• Left upper rack mount bracket assembly, includes: Left upper rack mount bracket
(flat); Left upper rack mount bracket (L-shaped); Screw (torque to 32 inch-pounds)
• Right upper rack mount bracket assembly, includes: Right upper rack mount bracket
(flat); Right upper rack mount bracket (L-shaped); Screw (torque to 32 inch-pounds)
• M5 Tinnermans (0590-2318) and M5 Torx screws (0515-0671) are required
pieces of rack mount kit hardware.
• Seven pouches containing 14U Rack Mount Kit hardware; #10-32 x 5/16 Phillips
7
flathead screws (8); #10-32 x 5/16 Phillips panhead screws with washers (4)
• For use with the 9000 Series 42U rack (or racks with square holes): #10-32 x 5/16
retainer nuts; #1/4-20 x 0.500 Phillips panhead screws with glue (16); 0.375-inch
square washers (16)
• For use with rack with round holes: #10-32 clip nut (package of 20, only 4
required); #1/4-20 x 1/2 inch Phillips panhead screws, with lockhead washers (16)
42
Summary
Core Switch 2/64 V4.1 Installation Guide
,
Advertisement
Table of Contents
