Table of Contents
Advertisement
Overview
Cable Management Tray and Cable Guides
The Core Switch 2/64 ships with two items to assist with cable management:
Cabling Precautions
Follow these important cabling guidelines:
28
Cable management tray—The cable management tray is attached to the
bottom of the chassis, and routes the cables down below the chassis, or out the
sides of the chassis.
Cable guides—A set of sixteen cable guides ship with the Core Switch 2/64.
Cable guides serve to keep the cables evenly spaced, and to hold them away
from the 16-port cards, simplifying card replacement. Use the cable guides to
organize the port cables into logical groups, (for example, according to port
quads). The cable guides are free-floating and do not attach to the chassis.
Do not route the cables in front of the air exhaust vent, which is located at the
top of the port side of the chassis.
Do not use tie wraps. Tie wraps are not recommended for optical cables
because they are easily overtightened, leading to potential ruptures in the
cables.
Core Switch 2/64 V4.1 Installation Guide
Advertisement
Table of Contents
