Blower Side Component Descriptions - HP AA-RS2WC-TE Installation Manual

Overview
Table 2: Blower Side Component Descriptions
1
2
3
4
5
6
7
8
9
26
Item
Port card and
CP card LEDs
WWN card and bezel
assembly
Power supply LEDs
Blower power LED
Blower fault LED
Blower handle (1 of 3)
Blower assembly #3
Blower assembly #2
Blower assembly #1
Summary
Indicate 16-port card and CP card status.
Monitors CP card, 16-port card and power supply
status from the blower assembly side of the chassis.
The WWN card also stores the chassis serial number
and IP addresses assigned to the CP card slots.
The three power supply LEDs include the power LED,
predictive failure LED, and failure LED.
Indicates blower assembly power off or on.
Indicates blower assembly malfunctioning.
Use handle to remove a faulty blower assembly. See
Chapter 4, Installing Core Switch 2/64
page 121 for complete replacement instructions.
Provides cooling for the blower assembly side of the
chassis
Provides cooling for the blower assembly side of the
chassis
Provides cooling for the blower assembly side of the
chassis
Core Switch 2/64 V4.1 Installation Guide
FRUs, on