Laser Devices; Laser Safety Warnings; Compliance With Cdrh Regulations; Compliance With International Regulations - HP AA-RS2WC-TE Installation Manual

Regulatory Compliance Notices

Laser Devices

All systems equipped with a laser device comply with safety standards, including
International Electrotechnical Commission (IEC) 825. With specific regard to the
laser, the equipment complies with laser product performance standards set by
government agencies as a Class 1 laser product. The product does not emit
hazardous light; the beam is totally enclosed during all modes of customer
operation and maintenance.

Laser Safety Warnings

To reduce the risk of exposure to hazardous radiation:

Compliance with CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and
Drug Administration implemented regulations for laser products on August 2,
1976. These regulations apply to laser products manufactured from August
1,1976. Compliance is mandatory for products marketed in the United States.

Compliance with International Regulations

All systems equipped with laser devices comply with appropriate safety standards
including IEC 825.

Laser Product Label

The following label or equivalent is located on the surface of the laser device.
208
Do not try to open the laser device enclosure. There are no user-serviceable
components inside.
Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.
Allow only authorized service technicians to repair the laser device.
This label indicates that the product is
classified as a CLASS 1 LASER PRODUCT.
This label appears on a laser device
installed in your product.
Core Switch 2/64 V4.1 Installation Guide