Recording Critical Switch Information; Sample Output For Logging Into Switch 0 From A Serial Console - HP AA-RS2WC-TE Installation Manual

Recording Critical Switch Information

1. Create a serial connection to the healthy CP card:
2. Log into the healthy CP card as Admin, then enter 0 to log into Switch 0 (see
Figure 30: Sample output for logging into switch 0 from a serial console
Core Switch 2/64 V4.1 Installation Guide
a. Disable any serial communication programs running on the workstation
(such as synchronization programs).
b. Insert a serial cable into the terminal serial port (second serial port from
the top; see Figure 20
c. Connect other end of serial cable to a serial port on the workstation.
If necessary, the adapter on the serial cable can be removed to allow for a
serial RJ45 connection.
d. Open the terminal emulator application and configure as follows:
— For Windows systems:
Parameter
Bits per second
Databits
Parity
Stop bits
Flow control
— For most UNIX systems, enter the following string at the prompt:
tip /dev/ttyb -9600
e. When the terminal emulator application stops reporting information, press
Enter.
Figure 30). The default password is password.
Fabric OS (cp0)
cp0 Console Login: admin
Password:
Enter Switch Number to Login <0 or 1>: 0
SW0:admin>
on page 76).
Value
9600
8
None
1
None
Installing Core Switch 2/64 FRUs
135