Replacing An Adapter - Lenovo HX3510-G Installation And Service Manual

Adapter connector (slot 5)
Adapter connector (slot 4)
Figure 82. Adapter removal
Step 8. If you are instructed to return the adapter, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.

Replacing an adapter

Use this information to replace an adapter.
Notes:
• If your adapter was previously configured, backup or record its configuration information, if possible,
before replacing the adapter. See the documentation for your adapter for information and instructions.
• The following adapters support 10-Gbps transfer rate only:
– Intel X710 2x10GbE SFP+ Adapter
– Intel X710 ML2 4x10GbE SFP+ Adapter
– Intel X710-DA2 ML2 2x10GbE SFP+ Adapter
Replacing an adapter in a riser-card assembly
Use this section to replace an adapter in a riser-card assembly.
The following illustration shows the locations of the adapter expansion slots from the rear of the server.
Slot 1
Slot 2
Slot 3
Figure 83. PCI riser-card adapter expansion slot locations
The following table describes the maximal card dimension supported in each slot.
152
HX3510-G, HX5510, HX5510-C, HX7510 Installation and Service Guide
2
Slot 4 Slot 5
Adapters
Brackets
1
Slot 6
Slot 7
Slot 8