Lenovo HX3510-G Installation And Service Manual page 174

Cable cover
Figure 96. Cable cover removal
8. Grasp the EIA assembly and pull it slightly forward to remove it from the server.
Figure 97. EIA assembly removal
9. If you are instructed to return the EIA assembly, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
3.5-inch model
There are the right EIA assembly and the left EIA assembly on the server, use the following steps to remove
them.
For the right EIA assembly
1. Read the safety information that begins on "Safety" on page v and "Removing and replacing guidelines"
on page 101.
2. Turn off the server and peripheral devices, and disconnect the power cord and all external cables.
162
HX3510-G, HX5510, HX5510-C, HX7510 Installation and Service Guide
EIA assembly