Lenovo HX3510-G Installation And Service Manual page 834

CIM Information
Prefix: PLAT ID: 0331
User Response
No action; information only. PCI 1 : PCI 2 : PCI 3 : PCI 4 : PCI 5 : PCI 6 : PCI 7 : PCI 8 :
• 816f0028-2101ffff : Sensor [SensorElementName] has returned to normal on management system
[ComputerSystemElementName]. (TPM Cmd Failures)
This message is for the use case when an implementation has detected a Sensor returned from
degraded/unavailable/failure.
May also be shown as 816f00282101ffff or 0x816f00282101ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Warning - Other
SNMP Trap ID
60
CIM Information
Prefix: PLAT ID: 0399
User Response
No action; information only.
• 816f0107-0301ffff : An Over-Temperature Condition has been removed on [ProcessorElementName].
(CPU 1)
This message is for the use case when an implementation has detected a Over-Temperature Condition
has been Removed for Processor.
May also be shown as 816f01070301ffff or 0x816f01070301ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Critical - Temperature
SNMP Trap ID
822
HX3510-G, HX5510, HX5510-C, HX7510 Installation and Service Guide