Step 4.
Grasp the blue touch-points on the front and the rear side of the riser-card assembly; then, lift it up
to remove it from the server. Place the riser-card assembly on a flat, static-protective surface.
• For half-length and low profile adapters (for HX7510 only)
Figure 73. Riser-card assembly removal - half-length and low profile adapters
• For full-height, full-length adapters (for HX3510-G only)
144
HX3510-G, HX5510, HX5510-C, HX7510 Installation and Service Guide
PCI riser-card assembly 2
PCI riser-card
assembly 1