Removing The Lcd System Information Display Panel - Lenovo HX3510-G Installation And Service Manual

• Set the system date and time.
• Set the power-on password.
• Reconfigure the server.
See "Using the Setup Utility" on page 35 for details.

Removing the LCD system information display panel

Use this information to remove the LCD system information display panel.
Note: The LCD system information display panel is available only on some models.
Removing the LCD panel assembly on a 3.5-inch model
To remove the LCD panel assembly on a 3.5-inch model, complete the following steps.
1. Read the safety information that begins on "Safety" on page v and "Removing and replacing guidelines"
on page 101.
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables, if
necessary.
3. Remove the top cover (see "Removing the top cover" on page 116).
4. Remove the fan cage assembly (See "Removing the fan cage assembly" on page 135).
5. Pull up the release latch slightly and slide the LCD panel assembly out of the server.
Figure 142. LCD panel assembly removal
6. Disconnect the cable from the back of the LCD system information display panel.
Note: To disconnect the cable, press evenly on the connector release latch first; then, pull the cable out.
7. 1 Pull the tab on the LCD retention bracket to the left to disengage the retention bracket.
retention bracket to remove it from the server.
194
HX3510-G, HX5510, HX5510-C, HX7510 Installation and Service Guide
1
2
LCD panel assembly Release latch
2 Rotate the