Lenovo HX3510-G Installation And Service Manual page 207

1
2
Figure 143. Retention bracket removal
8. Carefully remove the LCD system information display panel out of the LCD panel assembly.
Figure 144. LCD system information display panel removal
9. If you are instructed to return the LCD panel assembly, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Removing the LCD system information display panel on a 2.5-inch model
To remove the LCD system information display panel inside the media cage on a 2.5-inch model, complete
the following steps.
1. Read the safety information that begins on "Safety" on page v and "Removing and replacing guidelines"
on page 101.
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables, if
necessary.
3. Remove the top cover (see "Removing the top cover" on page 116).
4. Remove the fan cage assembly "Removing the fan cage assembly" on page 135).
5. Remove the media cage (see "Removing the media cage (also called lightpath LCD operation panel
assembly)" on page 139),
6. Disconnect the cable from the back of the LCD system information display panel.
Note: To disconnect the cable, press evenly on the connector release latch first; then, pull the cable out.
7. 1 Pull the tab on the LCD retention bracket to the left to disengage the retention bracket.
retention bracket to remove it from the server.
Retention bracket
LCD system information
display panel
.
Chapter 5 Removing, and replacing components
2 Rotate the
195