Lenovo HX3510-G Installation And Service Manual page 823

3. Make sure that the disk firmware and RAID controller firmware are at the latest level.
4. Replace backplane.
• 816f000d-0414ffff : The Drive [StorageVolumeElementName] has been removed from unit
[PhysicalPackageElementName]. (Drive 20)
This message is for the use case when an implementation has detected a Drive has been Removed.
May also be shown as 816f000d0414ffff or 0x816f000d0414ffff
Severity
Info
Serviceable
Yes
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
22
CIM Information
Prefix: PLAT ID: 0163
User Response
1. Reseat hard disk drive n.(n = hard disk drive number). Wait 1 minute or more before reinstalling
the drive.
2. Replace the hard disk drive.
3. Make sure that the disk firmware and RAID controller firmware are at the latest level.
4. Replace backplane.
• 816f000d-0415ffff : The Drive [StorageVolumeElementName] has been removed from unit
[PhysicalPackageElementName]. (Drive 21)
This message is for the use case when an implementation has detected a Drive has been Removed.
May also be shown as 816f000d0415ffff or 0x816f000d0415ffff
Severity
Info
Serviceable
Yes
Automatically notify support
No
Alert Category
Appendix A. Integrated management module II (IMM2) error messages
811