Lenovo HX3510-G Installation And Service Manual page 180

For the right EIA assembly
1. Read the safety information that begins on "Safety" on page v and "Removing and replacing guidelines"
on page 101.
2. Turn off the server and peripheral devices, and disconnect the power cord and all external cables.
3. Remove the top cover (see "Removing the top cover" on page 116).
4. Remove the fan cage (see "Removing the fan cage assembly" on page 135).
5. Insert the cable connector into the cable connector holder.
EIA assembly
Figure 107. Cable connector installation
6. Align the EIA assembly with the alignment pin.
168
HX3510-G, HX5510, HX5510-C, HX7510 Installation and Service Guide
Cable connector holder