Removing And Replacing Tier 1 Crus; Removing The Air Baffle - Lenovo HX3510-G Installation And Service Manual

Figure 46. Closing the server cover completely
Step 7. Slide the server into the rack.
Step 8. Reconnect the external cables and power cords.

Removing and replacing Tier 1 CRUs

Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will
be charged for the installation.
The illustrations in this document might differ slightly from your hardware.

Removing the air baffle

When you work with some optional devices, you must first remove the air baffle to access certain
components or connectors on the system board. The following illustration shows how to remove the air
baffle.
.
Chapter 5 Removing, and replacing components
119