Replacing The Operator Information Panel Assembly - Lenovo HX3510-G Installation And Service Manual

Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3. Remove the top cover (see "Removing the top cover" on page 116).
Step 4. Disconnect the cable from the back of the operator information panel assembly.
Step 5. 1 Pull up the release tab slightly and
the server.
Operator information
panel assembly
Figure 159. Operator information panel removal
Step 6. If you are instructed to return the operator information panel assembly, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to you.

Replacing the operator information panel assembly

Use this information to replace the operator information panel assembly.
To install the operator information panel, complete the following steps.
Step 1. Read the safety information that begins on "Safety" on page v and "Removing and replacing
guidelines" on page 101.
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3. Remove the top cover (see "Removing the top cover" on page 116).
Step 4. Slide the operator information panel into the server until it clicks into place.
2 slide the operator information panel assembly out of
1
2
Release latch
.
Chapter 5 Removing, and replacing components
203