Table of Contents
Advertisement
Testing the motion
sensor
You can observe the switch's LED
indicator and test the performance of
the motion sensor.
1
Press M
N.
2
Move to an area near the switch.
3
While moving near the switch,
observe the LED indicator.
R When motion is detected, the
LED indicator blinks very
quickly in red.
4
Note the areas where movement
is detected.
R You can use the [Home
Network] app to adjust the
sensitivity of the motion sensor.
For more information, refer to
the User's Guide (page 13).
5
Press M
N again.
Using the switch
(manual control)
R Turn on the lights by pressing the on/
off switch.
R Turn off the lights by pressing the on/
off button.
R By default, the lights turn on when
motion is detected, and turn off if no
motion is detected for xx minutes.
You can use the [Home Network]
app to adjust these settings. For
more information, refer to the User's
Guide (page 13).
For assistance, please visit http://shop.panasonic.com/support
Features available
when using the
[Home Network] app
Some of the switch's features that are
available when using the [Home
Network] app are listed below. For
more information, refer to the User's
Guide (page 13).
– Turning the switch on and off
You can use the app to turn the
lights on and off manually, or
program a schedule and turn the
lights on and off automatically.
– System integration
You can configure the switch to turn
on when another device is triggered,
such as a window or door sensor, a
sound sensor of an indoor camera,
etc. (Appropriate device required.)
– Motion switch details
You can adjust the motion sensor's
sensitivity, change how long the
lights stay on when motion is
detected, etc.
Accessing the User's
Guide
The User's Guide is a collection of
online documentation that helps you
get the most out of the [Home
Network] app.
1
®
iPhone
/iPad
Tap
in the app's home screen.
Android™ devices
Tap
or press your mobile
device's menu button in the app's
home screen.
2
Tap [User's Guide].
Appendix
®
13
Advertisement
Table of Contents
