Show Platform Ip Multicast - Cisco ME 3400 Command Reference Manual

Ethernet access switch
Table of Contents

Advertisement

Appendix C
Cisco ME 3400 Ethernet Access Switch Show Platform Commands

show platform ip multicast

Use the show platform ip multicast privileged EXEC command to display platform-dependent IP
multicast tables and other information.
Syntax Description
acl-full-info
counters
groups
hardware [detail]
interfaces
locks
mdfs-routes
retry
trace
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(25)EX
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-9640-10
show platform ip multicast {acl-full-info | counters | groups | hardware [detail] | interfaces |
locks | mdfs-routes | retry | trace} [ | {begin | exclude | include} expression]
Display IP multicast routing access-control list (ACL) information, in
particular the number of outgoing VLANs for which router ACLs at the
output cannot be applied in hardware.
Display IP multicast counters and statistics.
Display IP multicast routes per group.
Display IP multicast routes loaded into hardware. The optional detail
keyword is used to show port members in the destination index and route
index.
Display IP multicast interfaces.
Display IP multicast destination-index locks.
Display multicast distributed fast switching (MDFS) IP multicast routes.
Display the IP multicast routes in the retry queue.
Display the IP multicast trace buffer.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco ME 3400 Ethernet Access Switch Command Reference
show platform ip multicast
C-13

Advertisement

Table of Contents
loading

Table of Contents