Replacement And Adjustment; Before You Begin - Ricoh B064 SERIES Service Manual

3. REPLACEMENT AND ADJUSTMENT

3.1 BEFORE YOU BEGIN

[A]
1. Disengage the Z-folding unit from the machine.
2. Disengage the Z-folding unit from the finisher (or cover sheet feeder).
3. At the bottom on the sides of the Z-folding unit:
• Remove the lock bracket [A] ( x 1).
• Pull out the foot extension [B].
• Re-attach the bracket [A] to lock the foot in the open position ( x 1).
Reinstallation
Do this procedure in the opposite sequence to retract and lock the extensions
below the Z-folding unit.

CAUTION
The Z-folding unit is not stable, with or without the feet extended. Do your
work carefully; do not tilt the unit.
SM
CÓPIA NÃO CONTROLADA
REPLACEMENT AND ADJUSTMENT
[B]
3
CÓPIA NÃO CONTROLADA
[A]
B660I900.WMF
B660