Ricoh B064 SERIES Service Manual page 1328

G3 INTERFACE UNIT TYPE 7500 (B820)
6. Connect the FFC [A] (Flat Film Connector) to the CCU drive board [B].
IMPORTANT: Connect the FFC with the green, insulated side visible and the
bare connector strip down so it touches the connector strip of
the board.
7. Attach the CCU drive board [B] to the machine
• Set the hook
• Fasten the CCU drive board with the screws (
8. Connect the other end of the FFC [C] to the FCU.
IMPORTANT: Connect the FFC with the green, insulated visble and the bare
connector strip down so it touches the connector strip of the
board.
B819/B820
CÓPIA NÃO CONTROLADA
[A]
of the bracket into the slot
18
CÓPIA NÃO CONTROLADA
[C]
B820R105.WMF
[B]
in the frame.
x2).
SM