Ricoh B064 SERIES Service Manual page 1394

BIT SWITCHES
Communication Switch 1B [SP No. 1-104-028]
No FUNCTION
Extension access code (0 to
7) to turn V.8 protocol On/Off
0-7
0: On
1: Off
Communication Switch 1C [SP No. 1-104-029]
No FUNCTION
Extension access code (8 and
9) to turn V.8 protocol On/Off
0-1
0: On
1: Off
2-7 Not used
Communication Switch 1D - Not used (do not change the settings)
Communication Switch 1E - Not used (do not change the settings)
Communication Switch 1F - Not used (do not change the settings)
B819/B820
CÓPIA NÃO CONTROLADA
If the PABX does not support V.8/V.34 protocol
procedure, set this bit to "1" to disable V.8.
Example: If "0" is the PSTN access code, set bit 0
to 1. When the machine detects "0" as the first
dialed number, it automatically disables V.8
protocol. (Alternatively, if "3" is the PSTN access
code, set bit 3 to 1.)
Refer to communication switch 1B.
Example: If "8" is the PSTN access code, set bit 0
to 1. When the machine detects "8" as the first
dialed number, it automatically disables V.8
protocol. (If "9" is the PSTN access code, use bit
1.)
Do not change the settings.
84
CÓPIA NÃO CONTROLADA
COMMENTS
COMMENTS
SM