Cannot Receive By Alias Fax Number - Ricoh B064 SERIES Service Manual

Hide thumbs Also See for B064 SERIES:
Table of Contents

Advertisement

Cannot receive by Alias Fax number.

Check Point
1
LAN cable connected?
2
Firewall/NAT is installed?
3
Gatekeeper installed correctly?
4
Power to Gatekeeper switched on?
IP address/host name of Gatekeeper
5
correct on the sender's side?
DNS server registered when Gatekeeper
6
host name specified on sender's side?
7
Enable H.323 SW is set to on?
8
Local fax IP address registered?
9
Local fax Alias number registered?
10
Network bandwidth too narrow?
11
Remote fax cancelled transmission?
12
Local fax registered in Gatekeeper?
SM
CÓPIA NÃO CONTROLADA
Check the LAN cable connection.
Cannot the breach firewall. Request
the remote fax to send by using
another method (Fax, Internet Fax)
Contact the network administrator.
NOTE:
Contact the network administrator.
NOTE:
Request the sender to check the IP
address/host name.
NOTE:
Contact the network administrator.
NOTE:
Request the sender to check the
settings.
User Parameter SW 34 Bit 0
NOTE:
Register the IP address.
Register the Alias number.
Request the system administrator to
increase the bandwidth.
Lower the start modem reception baud
rate on the receiving side.
IPFAX SW06
Check whether the remote fax
cancelled the transmission.
Contact the network administrator.
NOTE:
43
CÓPIA NÃO CONTROLADA
IP-FAX TROUBLESHOOTING
Action
The sender machine displays
this error code when the
sender fax is a Ricoh model.
The sender machine displays
this error code when the
sender fax is a Ricoh model.
The sender machine displays
this error code when the
sender fax is a Ricoh model.
The sender machine displays
this error code when the
sender fax is a Ricoh model.
Only if the remote sender fax
is a Ricoh fax.
The sender machine displays
this error code when the
sender fax is a Ricoh model.
B819/B820

Advertisement

Table of Contents
loading

This manual is also suitable for:

B246 seriesB140 seriesD052 series

Table of Contents