Ricoh B064 SERIES Service Manual page 1329

9. Attach the connector bracket to the G3 expansion board (
10. If one G3 line is being installed, attach the connector bracket
the left..
-or-
If two G3 lines are being installed, attach the connector brackets
shown on the right.
11. If only one G3 line is being installed, go to the next step.
-or-
If two lines are being installed, insert the 2nd G3 board [A] into the empty slot
of the interface unit and fasten it (
SM
CÓPIA NÃO CONTROLADA
G3 INTERFACE UNIT TYPE 7500 (B820)
x2).
19
CÓPIA NÃO CONTROLADA
B820R106.WMF
x1).
as shown on
,
B820R107.WMF
B819/B820
as