Ricoh B064 SERIES Service Manual page 1341

Code Meaning
14-05
SMTP Server HDD Full
(452)
14-06 User Not Found on SMTP
Server (551)
14-07 Data Send to SMTP Server
Failed (4XX)
14-08 Data Send to SMTP Server
Failed (5XX)
14-09 Authorization Failed for
Sending to SMTP Server
14-10 Addresses Exceeded
14-11 Buffer Full
14-12 Data Size Too Large
SM
CÓPIA NÃO CONTROLADA
Suggested Cause/Action
Failed to access the SMTP server because the HDD
on the server is full.
Insufficient free space on the HDD of the SMTP
server. Contact the system administrator and check
the amount of space remaining on the SMTP server
HDD.
Insufficient free space on the HDD where the
destination folder is located. Contact the system
administrator and check the amount of space
remaining on the HDD where the target folder is
located.
Insufficient free space on the HDD at the target
destination for SMTP direct sending. Contact the
system administrator and check the amount of space
remaining on the target HDD.
The designated user does not exist.
The designated user does not exist on the SMTP
server.
The designated address is not for use with direct
SMTP sending.
Failed to access the SMTP server because the
transmission failed.
PC not operating correctly.
SMTP server operating incorrectly
Network not operating correctly.
Destination folder setting incorrect.
Direct SMTP sending not operating correctly.
Failed to access the SMTP server because the
transmission failed.
SMTP server operating incorrectly
Destination folder setting incorrect.
Direct SMTP sending not operating correctly.
Software application error.
POP-Before-SMTP or SMTP authorization failed.
Incorrect setting for file transfer
Number of broadcast addresses exceeded the limit
for the SMTP server.
The send buffer is full so the transmission could not
be completed. Buffer is full due to using Scan-to-
Email while the buffer is being used send mail at the
same time.
Transmission was cancelled because the detected
size of the file was too large.
31
CÓPIA NÃO CONTROLADA
ERROR CODES
B819/B820