PC and Peripheral Connections
Chapter 2
lower rear of the test stand.
DC Fan Assembly
Mass Connect
Engenious
Engenious
12V
24V
DC
DC
Power Strip
REAR
Figure 2-4. Filtered Power Strip/Cord Location
6. Plug-In the power cord to the power receptacle. Perform the
following procedure "PC and Peripheral Connections" before turning
on the system power switch.
For your convenience, PC connections have been brought out to the rear of
the system on the PC and GPIB Connector Panel (Figure 2-5).
1. Connect the monitor, keyboard, mouse, LAN and any USB or serial
devices such as barcode readers and strip printers to this connector
panel. .
Connect Power
Cord Here
Test System Installation
25