Preparing To Operate The Scanner; Assembling The Scanner - GRAPHTEC CS2000 Service Manual

3.

PREPARING TO OPERATE THE SCANNER

3.1 Assembling the Scanner

Assemble the stand before mounting the scanner unit. Eight bolts and an Allen wrench are provided with the
stand.
(1) Using the four bolts, loosely attach the center bar (3) to side stay R (1) and side stay L (2).
Attach the center bar loosely. Tighten the bolts securely after the scanner unit has been mounted on the
stand.
CS2000-UM-251-9370
( 1 )
( 3 )
3-1
3. PREPARING TO OPERATE THE SCANNER
( 2 )