Rear Cover - GRAPHTEC CS2000 Service Manual

8.7 Rear Cover

Disassembly procedure
8.2
p.8-2
Detaching the document
hold-down unit
Detaching the rear cover
(1) Remove the four black M3L6 binding head screws in the back of the scanner unit.
(2) Detach the rear cover.
Reattaching the rear cover
(1) Reattach the rear cover in the reverse order in which it was detached.
CS2000-UM-251-9370
8. DISASSEMBLING AND ADJUSTING MECHANICAL PARTS
This Section
Detaching the rear cover
Rear cover Rear co v er
M3L6 binding head screws M3L6 binding head scre ws
8-8