GRAPHTEC CS2000 Service Manual page 20

3. PREPARING TO OPERATE THE SCANNER
Attaching the document support wires
(1) Insert one end of the document support wire provided into the slot at the rear of the scanner.
(2) Squeeze the document support wire, and insert the other end.
(3) Press down on both sides of the document support wire.
(4) Attach the other document support wires in the same manner.
Detach the document support wires when moving or packing the scanner. Squeeze softly and lift them to detach.
CS2000-UM-251-9370 3-8