Checking The Interface Connection - GRAPHTEC CS2000 Service Manual

4.2 Checking the Interface Connection

If the scanner is connected to a system with Adaptec EZ-SCSI DELUXE* installed, the scanner will be recognized
under "Scanner" in the Device Manager.
* EZ-SCSI DELUXE is the software included with the SCSI adapter. For details, see the SCSI adapter instruction
manual.
For Windows 95/98/Me
Open the System window from within the Control Panel in My Computer.
Click on the Device Manager tab to display the list of installed devices. Confirm that the CS2000 is
recognized under "Other devices."
For Windows NT 4.0:
From the Control Panel window in the My Computer folder, boot the SCSI adapter. Select the SCSI adapter
that is connected to the scanner by double-clicking it, then check that the scanner (CS2000) is listed below
the SCSI adapter and is thus acknowledged.
CS2000-UM-251-9370 4-9
4. OPERATION AND CONNECTION