Turning The Scanner On Or Off; Attaching The Document Support Wires - GRAPHTEC CS2000 Service Manual

3.5 Turning the Scanner On or Off

Whenever the scanner's Power switch is turned on, the POWER, PAPER, and ERROR lamps on the control
panel light up. When the scanner has been initialized, the POWER lamp lights up.
When resetting the scanner by turning it off then back on again, wait at least three seconds before turning it back
on.

3.6 Attaching the Document Support Wires

The document support wires should be attached when carrier sheets or heavy documents are scanned.
CS2000-UM-251-9370
3. PREPARING TO OPERATE THE SCANNER
Document support wires
3-7