Making The Document Hold-Down Unit Force Settings - GRAPHTEC CS2000 Service Manual

4.6 Making the Document Hold-Down Unit Force Settings

Changing the positions of the two levers at the top of the document hold-down unit enables you to switch
between two hold-down force settings.
High
.............. Use this setting with:
• Plain paper with a thickness of 0.8 mm or higher
• Documents with creases or strongly curled documents where the creases or curl affect the
scanning quality
Standard
...... Use this setting with:
• Plain paper with a thickness less than 0.8 mm
• Delicate or limp documents
CS2000-UM-251-9370
High
Standard
4-14
4. OPERATION AND CONNECTION