GRAPHTEC CS2000 Service Manual page 91

(9) Adjust the offset (origin). (See "Adjusting offset (origin)" on p. 10-9.)
(10) Align the sensor images (X overlap, Y offset). (See "Sensor joint aligning" on p. 10-11.)
(11) Perform shading (undesired color line removal). (See "Shading (undesired color line removal)" on p.
10-14.)
(12) Perform shading (undesired gray line removal). (See "Shading (undesired gray line removal)" on p.
10-17.)
(13) Perform Color correction (using a color correction sheet). (See "Color correction" on p. 10-21.)
(14) Turn off power and set all DIP switches to the OFF position (normal operation mode).
CS2000-UM-251-9370
9. BOARDS AND ELECTRICAL COMPONENTS
9-6