Rear View; Power Switch; Scsi Connectors - GRAPHTEC CS2000 Service Manual

2. PART NAMES AND FUNCTIONS

Rear View

Power switch

SCSI-ID switches
DIP switch AC line inlet

SCSI connectors

SCSI-ID switches
Used to specify the ID numbers of the SCSI interfaces.
DIP switch
Used to set the scanner's functions.
Power switch
Controls the on/off status of the power supply to the scanner.
AC line inlet
Connect the power cord's female plug here.
SCSI connectors
Used to connect SCSI interface cables. The two connectors are connected in parallel inside the scanner.
CS2000-UM-251-9370 2-3