Preparing To Operate The Scanner; System Requirements - GRAPHTEC CS500 User Manual

Image scanner
Hide thumbs Also See for CS500:
Table of Contents

Advertisement

3. PREPARING TO OPERATE THE SCANNER

3.1 System Requirements

The minimum system requirements for running the scanner's hardware and software are
listed below.
Operating system: Windows 2000 Professional/XP Professional/XP Home Edition
CPU: Pentium III/4
Memory: 32 MB or more
Monitor: 1024 × 768 pixels, 256 colors or more
Enough disk space to store data
Mouse
Interface: USB interface*
2
interface*
, or Ethernet interface (10BASE-T/100-BASE-TX).
1
*
If your scanner does not operate with the USB interface that comes with your computer,
or if your computer does not have a USB 2.0 interface, please contact your sales
representative or nearest Graphtec vendor for information on supported add-on cards.
2
*
Graphtec does not guarantee correct scanner operation with every IEEE 1394 computer
interface or add-on card. Please contact your sales representative or nearest Graphtec
vendor for information on supported add-on cards.
Recommended environment
For binary monochrome data
CPU: Pentium 4
Memory: 64 MB or more
USB 2.0 interface (that comes standard with your computer)
For grayscale data
CPU: Pentium 4
Memory: 256 MB or more
Monitor: 1024 × 768 pixels, High Color or higher resolution
USB 2.0 interface (that comes standard with your computer)
For 8-bit/24-bit color data (CS500 Series only)
CPU: Pentium 4
Memory: 512 MB or more
Monitor: 1024 × 768 pixels, True Color or higher
USB 2.0 interface (that comes standard with your computer)
The system configuration should correspond to the recommended specifications listed
here, in order to ensure the optimum capabilities of the scanner.
Use with a system configuration below the recommended specifications will affect the
scanning speed and prevent the scanner from operating to its specified capabilities.
To edit an A1-size or larger grayscale document with a resolution of 400 dpi or higher,
or a color document, you may need more than the recommended memory sizes above.
Depending on the type of document, you may not be able to scan in the document
even if you increase the memory size.
CS500/IS200
3. PREPARING TO OPERATE THE SCANNER
1
that comes standard with your computer, IEEE 1394
3 – 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS500 and is the answer not in the manual?

This manual is also suitable for:

Is200

Table of Contents

Save PDF