Coast/Set, Resume/Accel And Cancel Switches; Vehicle Speed Sensor (Vss); Transmission Range Switch - Suzuki GRAND VITARA XL-7 Owner's Manual

8E-20 CRUISE CONTROL SYSTEM
Coast/Set, Resume/Accel and Cancel
Switches
CAUTION:
Never disassemble combination switch assembly. Disas-
sembly will spoil its original functions.
These switches are built in the combination switch assembly.
REMOVAL AND INSTALLATION
Refer to "COMBINATION SWITCH" in Section 3C1.
INSPECTION
1) Disable air bag system referring to "DISABLING AIR BAG
SYSTEM" in Section 10B.
2) Disconnect connector (1) of COAST/SET, RESUME/ACCEL
and CANCEL switches.
3) Check for resistance between "SW" and "GND" terminals of
disconnected switch connector (1) under each condition
below.
If check result is not satisfactory, replace combination switch
assembly.
COAST/SET, RESUME/ACCEL and CANSEL switch speci-
fication
All switches released (OFF) : Infinity
CANCEL switch pressed (ON) : About 0 Ω Ω Ω Ω
COAST/SET switch rotated (ON) : 200 – 240 Ω Ω Ω Ω
RESUME/ACCEL switch rotated (ON) : 820 – 1000 Ω Ω Ω Ω

Vehicle Speed Sensor (VSS)

INSPECTION
Refer to Section 6E2.

Transmission Range Switch

Refer to Section 7B1 for inspection, removal, installation and
adjustment.