Suzuki GRAND VITARA XL-7 Owner's Manual page 293

6A2-6 ENGINE MECHANICAL (H27 ENGINE)
(a)
(a)
1
INSTALLATION
1
(a)
(a)
2
(b)
(b)
3
2
1
1) Install new intake manifold gaskets (1) to cylinder heads.
2) Install intake manifold (1).
Tighten bolts and nuts to specified torque.
Tightening torque
Intake manifold bolt and nut (a) :
23 N·m (2.3 kg-m, 16.5 lb-ft)
3) Install throttle body (2) to intake collector (1) with new throttle
body gasket.
Tighten bolts and nuts to specified torque.
Tightening torque
Throttle body bolt and nut (b) :
23 N·m (2.3 kg-m, 16.5 lb-ft)
4) Install EGR valve (1), EVAP canister purge valve (2), mani-
fold absolute pressure (MAP) sensor and each hoses to
intake collector and throttle body if removed.
Use new gasket, when installing IAC valve and EGR valve.
3. EVAP canister purge valve hose
5) Install throttle body and intake collector assembly to intake
manifold with new intake collector gaskets.