Suzuki GRAND VITARA XL-7 Owner's Manual page 576

Third Rear Seat Belt (If Equipped)
WARNING:
Be sure to read "SERVICE PRECAUTIONS" in this section before starting to work and observe every
precaution during work.
35 N·m (3.5 kg-m,
25.5 lb-ft)
35 N·m (3.5 kg-m,
25.5 lb-ft)
1. Upper anchor
2. Lower anchor
3. Retractor assembly
REMOVAL
Refer to the figure above to remove rear seat belts.
INSPECTION
Check third rear seat belt in the same way as when inspecting second rear seat belt. (Refer to "SECOND REAR
SEAT BELT" in this section.)
INSTALLATION
Install in reverse order of removal, noting the followings.
• Seat belt anchor bolts should have an unified fine thread (7/16-20 UNF). Under no circumstances should
any different sized or metric screw threads be used.
4. Buckle
Tightening Torque
(a)
(a)
4
4
SEAT BELT 10A-7
35 N·m (3.5 kg-m, 25.5 lb-ft)