Cruise Control System; Cruise Control System Circuit - Suzuki GRAND VITARA XL-7 Owner's Manual

Cruise Control System

The cruise control system is a device which maintains a preset vehicle speed while driving at a high speed, e.g.,
on a highway. It allows the driver to drive his vehicle at a constant speed of 40 km/h (25 mile/h) or higher without
depressing the accelerator pedal (constant cruising). The system also has such functions as to change the vehi-
cle speed without operating the accelerator pedal (but using SET COAST and ACCEL RESUME switches), can-
cel cruise control (CANCEL switch) and resume the speed in memory automatically after cruise control is
cancelled (ACCEL RESUME switch). The system mainly consists of a vehicle speed sensor, an actuator
assembly incorporated with control module, cruise main switch, SET COAST switch, ACCEL RESUME switch
and CANCEL switch, etc.
1. Cruise main switch
1-1 Cruise main switch indicator lamp
2. "CRUISE" Indicator light
3. SET COAST/ACCEL RESUME/CANCEL switch
4. Vehicle speed sensor
5. Cruise control actuator assembly (with control module)

Cruise control system circuit

Refer to Section 8A.
6. PCM / ECM
7. Stop lamp switch (with brake pedal position switch)
8. Clutch pedal position switch (M/T vehicle)
9. Automatic transmission
10. Transmission range switch (Park/Neutral position switch) (A/T vehicle)
CRUISE CONTROL SYSTEM 8E-3