8E-24 CRUISE CONTROL SYSTEM
Cruise Cable
1. Actuator cap
2. Actuator assembly
3. Screw
REMOVAL
1) Disconnect cruise cable from cruise control arm and accelerator bracket.
2) Remove actuator cap and disconnect cruise cable from actuator.
3) Release cable from all clamps.
4) Remove cable from vehicle.
INSTALLATION
Install cruise cable by reversing removal procedure, noting the following points.
• Refer to the figure for proper clamp location and cable routing.
• Adjust cable play to specification referring to "CRUISE CABLE PLAY INSPECTION AND ADJUSTMENT" in
this section.
4. Cruise cable
7. Clamp at member
5. Clamp
8. Accelerator pedal
6. Grommet
9. Member