Suzuki GRAND VITARA XL-7 Owner's Manual page 539

8E-18 CRUISE CONTROL SYSTEM
TERMINALS
E132-11 – body ground Ground
E132-6 – E132-12
E132-8 – E132-5
E132-9 – E132-11
(M/T)
E132-9 – E132-11
(A/T)
RESISTANCE CHECK
4) Disconnect cruise control module connector from cruise con-
CAUTION:
Never touch terminals of cruise control module itself or
connect voltmeter or ohmmeter.
5) Check resistance between each pair of terminals of discon-
1. Cruise control module connector (E132)
CIRCUIT
Brake pedal position
switch (in stop lamp
switch)
CANCEL switch
COAST SET switch
RESUME ACCEL
switch
Clutch pedal position
switch (M/T only)
Transmission range
switch (Park/neutral
position switch)
(A/T only)
trol module with ignition switch OFF.
nected connectors as shown in the following table.
STANDARD
RESISTANCE
Continuity
Continuity Brake pedal released.
No continuity Brake pedal depressed.
No continuity CANCEL switch OFF (released).
Continuity CANCEL switch ON (pressed).
No continuity COAST SET switch OFF (released).
200 – 240 Ω
COAST SET switch ON (rotated).
No continuity RESUME ACCEL switch OFF
(released).
820 – 1000 Ω
RESUME ACCEL switch ON
(rotated).
No continuity Clutch pedal released.
Continuity Clutch pedal depressed fully.
Continuity Selector lever in "P" or "N" range.
No continuity Selector lever in "R", "D", "2" or "L"
range.
CONDITION
–