Suzuki GRAND VITARA XL-7 Owner's Manual page 402

Brush and brush holder
Check each brush for wear by measuring its length as shown. If
brush is found worn down to service limit, replace brush.
Exposed brush length "a"
Standard : 10.5 mm (0.413 in.)
Limit : 1.5 mm (0.059 in.)
Rectifier
• Positive Rectifier
a) Using an ohmmeter, connect one tester probe to the "B"
terminal (1) and the other to each rectifier terminal (2).
b) Reverse the polarity of the tester probes and repeat step a).
c) Check that one shows continuity and the other shows no
continuity. If there is continuity, replace the rectifier.
• Negative Rectifier
a) Using an ohmmeter, connect one tester probe to each neg-
ative terminal (1) and the other to each rectifier terminal (2).
b) Reverse the polarity of the tester probes and repeat step a).
c) Check that one shows continuity and the other shows no
continuity. If there is continuity, replace the rectifier.
CHARGING SYSTEM 6H-5