Cruise" Indicator Lamp Circuit Check - Suzuki GRAND VITARA XL-7 Owner's Manual

"Cruise" Indicator Lamp Circuit Check

Step
1 Check Circuit for Short.
1) Disconnect connector from cruise control module with
ignition switch OFF.
2) Turn ignition switch ON.
Does "CRUISE" indicator lamp turn ON?
2 Check Circuit for Open
1) Check for proper connection to cruise control module at
terminal E132-4.
2) If OK, connect terminal E132-4 to ground.
Does indicator lamp turn ON at ignition switch ON?
3 Lamp Bulb Check
1) Remove combination meter from instrument panel.
2) Remove lamp bulb and check it.
Is bulb in good condition?
Fig. for Step 2
Action
CRUISE CONTROL SYSTEM 8E-9
Yes
"GRN/YEL" circuit Go to Step 2.
is shorted to
ground.
Lamp circuit is OK. Go to Step 3.
"BLK/WHT" or Replace bulb.
"GRN/YEL" circuit
is open.
No