Suzuki GRAND VITARA XL-7 Owner's Manual page 619

10B-42 AIR BAG SYSTEM
Fig. for STEP 1 and 2
Fig. for STEP 2
[A] : For DTC B1041
[B] : For DTC B1045
Special tool
(A) : 09932-75020
(B) : 09932-75010
NOTE:
Upon completion of inspection and repair work, perform following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear diagnostic trouble codes (Refer to DTC CLEARANCE), if any.
• Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK to confirm that the trouble has been corrected.
DTC B1042 and B1046 :
Step
1 1) With ignition switch OFF, remove center pil-
lar inner garnish of applicable side then dis-
connect seat belt pretensioner connector.
2) Check proper connection to applicable seat
belt pretensioner at terminals in "Q11" or
"Q12" connector.
3) If OK then connect Special Tool (B) to seat
belt pretensioner connector disconnected at
the step 1.
With ignition switch ON, is DTC B1042 or
B1046 still current?
Action
1. Pretensioner harness
Yes
Go to step 2.
No
Ignition switch OFF.
Replace seat belt preten-
sioner (Refer to Section
10A).