Suzuki GRAND VITARA XL-7 Owner's Manual page 70

NOTE:
For the descriptions (items) not found in this section, refer to the same section of the Service Manual
mentioned in the FOREWORD of this manual.
General Information ........................................3A-1
Alignment Service Data (without Load) .........3A-1
Alignment Service Data (without Load)
Toe-in (Toe-in gauge measurement) "B" – "A" :
1 ± 2 mm (0.04 ± 0.08 in.)
Camber angle "C" :
0 ± 1° 30'
Caster :
2° 30' ± 1°
[A] : Top view 1. Center line of wheel
[B] : Front view
SECTION 3A
FRONT END ALIGNMENT
CONTENTS
General Information
✱1.
Forward
✱2.
Body center
On-Vehicle Service
Reference Information
SIDE SLIP
For inspecting front wheel side slip with side slip tester
Side slip limit :
IN 4 mm/m – OUT 2 mm/m
(IN 0.158 in/3.3 ft – OUT 0.078 in/3.3 ft)
If side slip exceeds above limit, toe-in or front wheel alignment
may out not be correct.
On-Vehicle Service ......................................... 3A-1
Reference Information .................................. 3A-1
FRONT END ALIGNMENT 3A-1
3A