Select Cable - Suzuki GRAND VITARA XL-7 Owner's Manual

7B1-48 AUTOMATIC TRANSMISSION (4 A/T)

SELECT CABLE

1. Selector lever assembly
2. Selector lever assembly mounting bolt
3. Selector cable
4. Cable bracket
5. Cable bracket mounting bolt
2
6. Washer
7. Clip
8. Manual select lever nut (transmission range switch side)
9. Lock washer
10. Manual select lever
ADJUSTMENT
1) Loosen manual shift lever (select cable side) nut (1).
2) Shift select lever to "N" range.
4
3) Align center line (2) on manual valve shaft (3) to "N" refer-
4) Tighten manual shift lever nut (selector cable side) (1) as
3
1, (a)
Tightening torque
Manual shift lever nut (a) :
23 N·m (2.3 kg-m, 17.0 lb-ft)
5) After select cable was installed, check for the following.
• Push vehicle with selector lever shifted to "P" range.
• Vehicle can not be driven in "N" range.
• Vehicle can be driven in "D", "2" and "L" ranges.
• Vehicle can be backed in "R" range.
ence line (4) as shown.
specified torque.
Vehicle should not move.
11. Transmission range switch assembly
12. Transmission range switch mounting bolt
13. Manual select lever nut (selector cable side)
14. Selector cable clip
Tightening Torque