Suzuki GRAND VITARA XL-7 Owner's Manual page 499

7F-14 DIFFERENTIAL (REAR)
1) Install special tools with bearings and universal joint flange
(2) to differential carrier (1).
NOTE:
This installation requires no spacer or oil seal.
Special tool
(E) : 09951-46010
(F) : 09926-78311-002
2) Tighten flange nut (1) so that specified bearing preload is
obtained.
NOTE:
• Before taking measurement with spring balance (2) or
torque wrench (3), check for rotation by hand and apply
small amount of differential oil to bearings.
• On measuring preload, rotate the drive bevel pinion
about 1 rotation per 2 seconds.
Special tool
(C) : 09922-75222
(F) : 09926-78311-002
Pinion bearing preload
: 0.9 – 1.7 N·m (9.0 – 17.0 kg-cm, 7.8 – 14.7 lb-in.)
Spring measure reading with special tool
: 18N – 34N (1.8 – 3.4 kg, 4.0 – 7.5 lb)
4. Socket with adapter