Evap Canister - Suzuki GRAND VITARA XL-7 Owner's Manual

ENGINE AND EMISSION CONTROL SYSTEM (SEQUENTIAL MULTIPORT FUEL INJECTION FOR H27 ENGINE) 6E2-45
INSPECTION
1) Check resistance between following terminals of EGR valve
(1) in each pair.
If found faulty, replace EGR valve assembly.
EGR valve resistance:
Terminals
A – B
C – B
F – E
D – E
B - valve body
E - valve body
2) Remove carbon from EGR valve gas passage.
NOTE:
Do not use any sharp-edged tool to remove carbon.
Be careful not to damage or bend EGR valve, valve seat
and rod.
3) Inspect valve (2), valve seat (3) and rod for fault, cracks,
bend or other damage.
If found faulty, replace EGR valve (1) assembly.
INSTALLATION
Reverse removal procedure noting the followings.
• Clean mating surface of valve and intake manifold.
• Use new gasket.

EVAP canister

INSPECTION
WARNING:
DO NOT SUCK nozzles on EVAP canister. Fuel vapor
inside EVAP canister is harmful.
Standard resistance
20 – 24 Ω Ω Ω Ω at 20°C (68°F)
infinity (∞ ∞ ∞ ∞ )