Main Bearings, Crankshaft And Cylinder Block - Suzuki GRAND VITARA XL-7 Owner's Manual

6A2-30 ENGINE MECHANICAL (H27 ENGINE)

Main Bearings, Crankshaft and Cylinder Block

1. Cylinder block
2. Lower crankcase :
Apply sealant 99000-31150 to lower
crankcase mating surface.
3. Crankshaft
4. Main bearing
5. Thrust bearing :
Set bearing facing grooved side to
crank weds.
6. Rear oil seal
7. Flywheel (M/T) Drive plate
(A/T)
8. Water pump
9. O-ring
10. Timing chain oil jet
11. O-ring
12. Clutch housing plate
13. Cap bolt
14. Lower crankcase bolt
15. Knock sensor
[A]: Sealant application amount
Tightening Torque
Do not reuse
Apply engine oil to sliding
surface of each parts.
"a": Width 3 mm (0.12 in.)
"b": Height 2 mm (0.08 in.)